Witam
Jako że jest to mój pierwszy post na tym forum to przedewszystkim chciałbyym się z wami przywitać.
Mainboard Information
System
Manufacturer : VIA Technologies, Inc.
Model : VT82C692BX
ID : FFFFFFFF-FFFFFFFF-FFFFFFFF-FFFFFFFF
Mainboard
Manufacturer : ACORP
MP Support : No
Model : 693-596-SMC
System BIOS : 05/29/2000-693-596-SMC-2A6LGX3MC-00
Chipset : VIA VT82C693 Apollo Pro Plus
System Memory Controller
Location : Mainboard
Error Correction Capability : None
Number of Memory Slots : 4
Maximum Installable Memory : 512MB
Bank0/1 - BANK_0 : DIMM EDRAM 32MB
Bank2/3 - BANK_1 : DIMM EDRAM 64MB
Bank4/5 - BANK_2 : Empty
Bank6/7 - BANK_3 : Empty
Chipset 1
Model : VIA Technologies Inc VT82C691/693A/694X Apollo Pro/133/133A System Controller
Bus(es) : ISA AGP PCI USB i2c/SMBus
Front Side Bus Speed : 1x 83MHz (83MHz data rate)
Maximum FSB Speed / Max Memory Speed : 1x 133MHz / 1x 133MHz
Width : 64-bit
IO Queue Depth : 1 request(s)
Logical/Chipset 1 Memory Banks
Bank 0 : 16MB SDRAM 2-3-3-0CL
Bank 1 : 16MB SDRAM 2-3-3-0CL
Bank 2 : 64MB SDRAM 2-3-3-0CL
Speed : 1x 83MHz (83MHz data rate)
Multiplier : 1/1x
Width : 64-bit
Power Save Mode : No
Fixed Hole Present : No
Memory Module(s)
Memory Module 1 : Hyundai Electronics TMS6268124-10 2801971D 32MB 16x(2Mx8) SDRAM PC100-333-811 (CL3 up to 100MHz) (CL2 up to 83MHz)
Memory Module 2 : MSC Vertriebs 864V863DT4EDG 64MB 8x(8Mx8) SDRAM PC100-222-622 (CL3 up to 125MHz) (CL2 up to 100MHz)
AGP Bus(es) on Hub 1
Version : 1.00
Speed : 2x 82MHz (164MHz data rate)
Multiplier : 1/2x
Side Band Enabled : No
Side Band Support : Yes
Aperture Size : 64MB
PCI Bus(es) on Hub 1
Version : 2.10
Number of Bridges : 1
PCI Bus 0 : PCI (41MHz)
Multiplier : 1/2x
LPC Hub Controller 1
Model : VIA Technologies Inc VT82C596/A/B PCI to ISA Bridge
ACPI Power Management Enabled : Yes
Multiplier : 1/4x
Speed : 10MHz
DMA Multiplier : 1/2x
DMA Speed : 5MHz
System SMBus Controller 1
Model : Intel/VIA PIIX4 SMBus
Advanced TCO Mode Enabled : No
Slave Device Enabled : Yes
PEC Support : No
Speed : 16kHz
Expansion Slot(s)
ISA : ISA 16-bit +5V Full-Length
ISA : ISA 16-bit +5V Full-Length
ISA : ISA 16-bit +5V Full-Length
ISA : ISA 16-bit +5V Full-Length
PCI (9h) : PCI 32-bit +5V Full-Length Used (Realtek Semiconductor RT8139 (A/B/C/810x) Fast Ethernet Adapter)
PCI (Ah) : PCI 32-bit +5V Full-Length Available
PCI (Bh) : PCI 32-bit +5V Full-Length Available
PCI (8h) : PCI 32-bit +5V Full-Length Available
AGP (8h) : AGP 32-bit +5V Full-Length Used (Creative Labs CT6974 GeForce 256 DDR)
Port Connector
PRIMARY IDE : None - ATA / None
SECONDARY IDE : None - ATA / None
FDD : 8251 FIFO - Floppy Disk / None
COM1 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male
COM2 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male
LPT1 : Parallel Port ECP/EPP - DB-25 pin female / DB-25 pin female
Keyboard : Keyboard - None / PS/2
PS/2 Mouse - Detected : Mouse - PS/2 / PS/2
USB : USB - None / None
Performance Tips
Notice 224 : SMBIOS/DMI information may be inaccurate.
Tip 2511 : Some memory slots are free so the memory can be easily upgraded.
Warning 231 : IOQD is set too low. Performance will suffer.
Warning 100 : Large memory sizes should be made of Registered/Buffered memory.
Tip 2546 : Large memory modules should be ECC/Parity.
Warning 2520 : PCI bus speed is too high. Reduce FSB speed or FSB/PCI multiplier.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.
CPU & BIOS Information
Processor
Model : Intel® Celeron
Speed : 583MHz
Performance Rating : PR700 (estimated)
Type : Standard
Package : FC-PPGA Socket370
Rated Speed/FSB : 469MHz / 1x 67MHz
Multiplier : 7/1x
Generation : G6
Name : P6C (Mendocino) Celeron 300-533MHz 2V
Revision/Stepping : 6 / 5 (0)
Stepping Mask : mB0
Microcode : MU066503
Core Voltage Rating : 2.000V
Maximum Physical / Virtual Addressing : 36-bit / 32-bit
Native Page Size : 4kB
Co-Processor (FPU)
Type : Built-in
Revision/Stepping : 6 / 5 (0)
Processor Cache(s)
Internal Data Cache : 16kB Synchronous, Write-Thru, 4-way set, 32 byte line size
Internal Instruction Cache : 16kB Synchronous, Write-Back, 4-way set, 32 byte line size
L2 On-board Cache : 128kB ECC Synchronous, Write-Back, 4-way set, 32 byte line size
L2 Cache Multiplier : 1/1x (583MHz)
Upgradeability
Socket/Slot : Socket 370
Upgrade Interface : Slot 1
Supported Speed(s) : 583MHz+
Features
FPU - Co-Processor Built-in : Yes
VME - Virtual Mode Extensions : Yes
DE - Debugging Extension : Yes
PSE - Page Size Extension : Yes
TSC - Time Stamp Counter : Yes
MSR - Model Specific Registers : Yes
PAE - Physical Address Extension : Yes
MCE - Machine Check Exception : Yes
CX8 - Compare & Exchange Instruction : Yes
APIC - Local APIC Built-in : No
SEP - Fast System Call : Yes
MTRR - Memory Type Range Registers : Yes
PGE - Page Global Enable : Yes
MCA - Machine Check Architecture : Yes
PAT - Page Attribute Table : Yes
PSE36 - 36-bit Page Size Extension : Yes
PSN - Unique Serial Number : No
CLF - Cache Line Flush Support : No
DS - Debug Trace & EMON Store : No
ACPI - Software Clock Control : No
(W)MMX Technology : Yes
FXSR - Fast Float Save & Restore : Yes
SSE Technology : No
SSE2 Technology : No
SS - Self Snoop : No
HTT - Hyper-Threading Technology : No
TM - Thermal Monitor : No
PBE - Pending Break Enable : No
SSE3 Technology : No
MON - Monitor/MWait : No
DSCPL - CPL qualified Debug Store : No
EST - Enhanced SpeedStep Technology : No
TM2 - Thermal Monitor 2 : No
DAZ - Denormals Are Zero : No
Advanced Settings
L2 Cacheable Range : 4GB
L2 Cache Grouping : 1 bank(s)
L2 Cache Latency : 5 clock(s)
Data Error Checking : No
Low Power Mode : Yes
Fast Strings : Yes
IO Queue Depth : 8 request(s)
Machine Check Architecture Settings
Number of Reporting Banks : 5 bank(s)
Performance Tips
Warning 227 : CPU FSB speed higher than rated FSB! Reduce FSB speed.
Warning 222 : CPU speed higher than rated speed! Reduce CPU speed.
Notice 224 : SMBIOS/DMI information may be inaccurate.
Tip 219 : A SSE(2) processor is recommended for modern multimedia applications and games.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.
(Usunąłem informacje MTTR które pewnie nic nie mówią a zajmują kilkaanście wierszy)
General Information
Manufacturer : Award Software International, Inc.
Version : 6.00 PG
Date : 05/29/2000
Plug & Play Version : 1.00
SMBIOS/DMI Version : 2.20
(EE)PROM Size : 256kB
General Capabilities
Can be Updated/Flashed : Yes
Can be Shadowed : Yes
Is Socketed : Yes
Supports Plug & Play : Yes
Supports ESCD : Yes
Supports Enhanced Disk Drive : Yes
NEC PC-98 Spec Compatible : No
Power Management Features
Supports APM : Yes
Supports ACPI : Yes
Supports Smart Battery : No
Boot Features
Supports Selective Booting : Yes
Supports CD/DVD Boot : Yes
Supports PCMCIA/CardBus Boot : No
Supports LS-120 Boot : Yes
Supports ZIP Boot : Yes
Supports i2o Boot : No
Supports FireWire/1394 Boot : No
Performance Tips
Tip 201 : System BIOS is old. Check for an update.
Notice 224 : SMBIOS/DMI information may be inaccurate.
Tip 207 : A SMBIOS/DMI 2.3 or later compliant BIOS is recommended. Check for a BIOS update.
Tip 212 : BIOS can be shadowed so check whether it is.
Tip 211 : BIOS is flash-able and socketed so it can be upgraded when needed.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.
Moje pytanie więc: Czy jest możliwość zamontowania Procesora Intel® Celeron 800Mhz FCPGA (Tualatin o ilę się nie mylę) oczywiście. Płyta posiada złącze dla procesora Slot1. Natomiast ja mam umieszczony Celeron 466 na przejściówce która umożliwia zmianę napięcia. Przy zmianie napięcia nawet na takie same na jakim działa w tej chwili nie startuje więc mnie to dziwi. A więc czy na tę przejściówkę dam radę zamontować w/ż procesor czy musiałbym zakupić przejściówkę Slot1--> FCPGA ?
I jeszcze jedno. Jak przełączyć działanie pamięci na 100MHz z 66MHz? Przy zmianie FSB zmienia się i taktowanie Ramu jednak mam pamięci 100MHz i chciałbym je wykorzystać. W Biosie brak jakichkolwiek zmian dotyczących prędkości pamięci RAM. Słyszałem o programie WCPREDIT ale nie wiem co tam mam poprzestawiać aby zoptymalizować Ram.
Pozdrawiam
