Skocz do zawartości

Trolu609

Stały użytkownik
  • Postów

    195
  • Dołączył

  • Ostatnia wizyta

Odpowiedzi opublikowane przez Trolu609

  1. Witam

    Jako że jest to mój pierwszy post na tym forum to przedewszystkim chciałbyym się z wami przywitać.

     

    Mainboard Information

     

    System

    Manufacturer : VIA Technologies, Inc.

    Model : VT82C692BX

    ID : FFFFFFFF-FFFFFFFF-FFFFFFFF-FFFFFFFF

     

    Mainboard

    Manufacturer : ACORP

    MP Support : No

    Model : 693-596-SMC

    System BIOS : 05/29/2000-693-596-SMC-2A6LGX3MC-00

    Chipset : VIA VT82C693 Apollo Pro Plus

     

    System Memory Controller

    Location : Mainboard

    Error Correction Capability : None

    Number of Memory Slots : 4

    Maximum Installable Memory : 512MB

    Bank0/1 - BANK_0 : DIMM EDRAM 32MB

    Bank2/3 - BANK_1 : DIMM EDRAM 64MB

    Bank4/5 - BANK_2 : Empty

    Bank6/7 - BANK_3 : Empty

     

    Chipset 1

    Model : VIA Technologies Inc VT82C691/693A/694X Apollo Pro/133/133A System Controller

    Bus(es) : ISA AGP PCI USB i2c/SMBus

    Front Side Bus Speed : 1x 83MHz (83MHz data rate)

    Maximum FSB Speed / Max Memory Speed : 1x 133MHz / 1x 133MHz

    Width : 64-bit

    IO Queue Depth : 1 request(s)

     

    Logical/Chipset 1 Memory Banks

    Bank 0 : 16MB SDRAM 2-3-3-0CL

    Bank 1 : 16MB SDRAM 2-3-3-0CL

    Bank 2 : 64MB SDRAM 2-3-3-0CL

    Speed : 1x 83MHz (83MHz data rate)

    Multiplier : 1/1x

    Width : 64-bit

    Power Save Mode : No

    Fixed Hole Present : No

     

    Memory Module(s)

    Memory Module 1 : Hyundai Electronics TMS6268124-10 2801971D 32MB 16x(2Mx8) SDRAM PC100-333-811 (CL3 up to 100MHz) (CL2 up to 83MHz)

    Memory Module 2 : MSC Vertriebs 864V863DT4EDG 64MB 8x(8Mx8) SDRAM PC100-222-622 (CL3 up to 125MHz) (CL2 up to 100MHz)

     

    AGP Bus(es) on Hub 1

    Version : 1.00

    Speed : 2x 82MHz (164MHz data rate)

    Multiplier : 1/2x

    Side Band Enabled : No

    Side Band Support : Yes

    Aperture Size : 64MB

     

    PCI Bus(es) on Hub 1

    Version : 2.10

    Number of Bridges : 1

    PCI Bus 0 : PCI (41MHz)

    Multiplier : 1/2x

     

    LPC Hub Controller 1

    Model : VIA Technologies Inc VT82C596/A/B PCI to ISA Bridge

    ACPI Power Management Enabled : Yes

    Multiplier : 1/4x

    Speed : 10MHz

    DMA Multiplier : 1/2x

    DMA Speed : 5MHz

     

    System SMBus Controller 1

    Model : Intel/VIA PIIX4 SMBus

    Advanced TCO Mode Enabled : No

    Slave Device Enabled : Yes

    PEC Support : No

    Speed : 16kHz

     

    Expansion Slot(s)

    ISA : ISA 16-bit +5V Full-Length

    ISA : ISA 16-bit +5V Full-Length

    ISA : ISA 16-bit +5V Full-Length

    ISA : ISA 16-bit +5V Full-Length

    PCI (9h) : PCI 32-bit +5V Full-Length Used (Realtek Semiconductor RT8139 (A/B/C/810x) Fast Ethernet Adapter)

    PCI (Ah) : PCI 32-bit +5V Full-Length Available

    PCI (Bh) : PCI 32-bit +5V Full-Length Available

    PCI (8h) : PCI 32-bit +5V Full-Length Available

    AGP (8h) : AGP 32-bit +5V Full-Length Used (Creative Labs CT6974 GeForce 256 DDR)

     

    Port Connector

    PRIMARY IDE : None - ATA / None

    SECONDARY IDE : None - ATA / None

    FDD : 8251 FIFO - Floppy Disk / None

    COM1 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male

    COM2 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male

    LPT1 : Parallel Port ECP/EPP - DB-25 pin female / DB-25 pin female

    Keyboard : Keyboard - None / PS/2

    PS/2 Mouse - Detected : Mouse - PS/2 / PS/2

    USB : USB - None / None

     

    Performance Tips

    Notice 224 : SMBIOS/DMI information may be inaccurate.

    Tip 2511 : Some memory slots are free so the memory can be easily upgraded.

    Warning 231 : IOQD is set too low. Performance will suffer.

    Warning 100 : Large memory sizes should be made of Registered/Buffered memory.

    Tip 2546 : Large memory modules should be ECC/Parity.

    Warning 2520 : PCI bus speed is too high. Reduce FSB speed or FSB/PCI multiplier.

    Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.

     

     

    CPU & BIOS Information

     

    Processor

    Model : Intel® Celeron

    Speed : 583MHz

    Performance Rating : PR700 (estimated)

    Type : Standard

    Package : FC-PPGA Socket370

    Rated Speed/FSB : 469MHz / 1x 67MHz

    Multiplier : 7/1x

    Generation : G6

    Name : P6C (Mendocino) Celeron 300-533MHz 2V

    Revision/Stepping : 6 / 5 (0)

    Stepping Mask : mB0

    Microcode : MU066503

    Core Voltage Rating : 2.000V

    Maximum Physical / Virtual Addressing : 36-bit / 32-bit

    Native Page Size : 4kB

     

    Co-Processor (FPU)

    Type : Built-in

    Revision/Stepping : 6 / 5 (0)

     

    Processor Cache(s)

    Internal Data Cache : 16kB Synchronous, Write-Thru, 4-way set, 32 byte line size

    Internal Instruction Cache : 16kB Synchronous, Write-Back, 4-way set, 32 byte line size

    L2 On-board Cache : 128kB ECC Synchronous, Write-Back, 4-way set, 32 byte line size

    L2 Cache Multiplier : 1/1x (583MHz)

     

    Upgradeability

    Socket/Slot : Socket 370

    Upgrade Interface : Slot 1

    Supported Speed(s) : 583MHz+

     

    Features

    FPU - Co-Processor Built-in : Yes

    VME - Virtual Mode Extensions : Yes

    DE - Debugging Extension : Yes

    PSE - Page Size Extension : Yes

    TSC - Time Stamp Counter : Yes

    MSR - Model Specific Registers : Yes

    PAE - Physical Address Extension : Yes

    MCE - Machine Check Exception : Yes

    CX8 - Compare & Exchange Instruction : Yes

    APIC - Local APIC Built-in : No

    SEP - Fast System Call : Yes

    MTRR - Memory Type Range Registers : Yes

    PGE - Page Global Enable : Yes

    MCA - Machine Check Architecture : Yes

    PAT - Page Attribute Table : Yes

    PSE36 - 36-bit Page Size Extension : Yes

    PSN - Unique Serial Number : No

    CLF - Cache Line Flush Support : No

    DS - Debug Trace & EMON Store : No

    ACPI - Software Clock Control : No

    (W)MMX Technology : Yes

    FXSR - Fast Float Save & Restore : Yes

    SSE Technology : No

    SSE2 Technology : No

    SS - Self Snoop : No

    HTT - Hyper-Threading Technology : No

    TM - Thermal Monitor : No

    PBE - Pending Break Enable : No

    SSE3 Technology : No

    MON - Monitor/MWait : No

    DSCPL - CPL qualified Debug Store : No

    EST - Enhanced SpeedStep Technology : No

    TM2 - Thermal Monitor 2 : No

    DAZ - Denormals Are Zero : No

     

    Advanced Settings

    L2 Cacheable Range : 4GB

    L2 Cache Grouping : 1 bank(s)

    L2 Cache Latency : 5 clock(s)

    Data Error Checking : No

    Low Power Mode : Yes

    Fast Strings : Yes

    IO Queue Depth : 8 request(s)

     

    Machine Check Architecture Settings

    Number of Reporting Banks : 5 bank(s)

     

    Performance Tips

    Warning 227 : CPU FSB speed higher than rated FSB! Reduce FSB speed.

    Warning 222 : CPU speed higher than rated speed! Reduce CPU speed.

    Notice 224 : SMBIOS/DMI information may be inaccurate.

    Tip 219 : A SSE(2) processor is recommended for modern multimedia applications and games.

    Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.

     

    (Usunąłem informacje MTTR które pewnie nic nie mówią a zajmują kilkaanście wierszy)

     

     

    General Information

    Manufacturer : Award Software International, Inc.

    Version : 6.00 PG

    Date : 05/29/2000

    Plug & Play Version : 1.00

    SMBIOS/DMI Version : 2.20

    (EE)PROM Size : 256kB

     

    General Capabilities

    Can be Updated/Flashed : Yes

    Can be Shadowed : Yes

    Is Socketed : Yes

    Supports Plug & Play : Yes

    Supports ESCD : Yes

    Supports Enhanced Disk Drive : Yes

    NEC PC-98 Spec Compatible : No

     

    Power Management Features

    Supports APM : Yes

    Supports ACPI : Yes

    Supports Smart Battery : No

     

    Boot Features

    Supports Selective Booting : Yes

    Supports CD/DVD Boot : Yes

    Supports PCMCIA/CardBus Boot : No

    Supports LS-120 Boot : Yes

    Supports ZIP Boot : Yes

    Supports i2o Boot : No

    Supports FireWire/1394 Boot : No

     

    Performance Tips

    Tip 201 : System BIOS is old. Check for an update.

    Notice 224 : SMBIOS/DMI information may be inaccurate.

    Tip 207 : A SMBIOS/DMI 2.3 or later compliant BIOS is recommended. Check for a BIOS update.

    Tip 212 : BIOS can be shadowed so check whether it is.

    Tip 211 : BIOS is flash-able and socketed so it can be upgraded when needed.

    Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.

     

     

     

    Moje pytanie więc: Czy jest możliwość zamontowania Procesora Intel® Celeron 800Mhz FCPGA (Tualatin o ilę się nie mylę) oczywiście. Płyta posiada złącze dla procesora Slot1. Natomiast ja mam umieszczony Celeron 466 na przejściówce która umożliwia zmianę napięcia. Przy zmianie napięcia nawet na takie same na jakim działa w tej chwili nie startuje więc mnie to dziwi. A więc czy na tę przejściówkę dam radę zamontować w/ż procesor czy musiałbym zakupić przejściówkę Slot1--> FCPGA ?

     

    I jeszcze jedno. Jak przełączyć działanie pamięci na 100MHz z 66MHz? Przy zmianie FSB zmienia się i taktowanie Ramu jednak mam pamięci 100MHz i chciałbym je wykorzystać. W Biosie brak jakichkolwiek zmian dotyczących prędkości pamięci RAM. Słyszałem o programie WCPREDIT ale nie wiem co tam mam poprzestawiać aby zoptymalizować Ram.

     

    Pozdrawiam

×
×
  • Dodaj nową pozycję...