Samsung Sp2514n Czy Seagate St3250620a

[uosiu]

Witam, jako, ze ostatnimi czasami mialem bierzmowanie, wiec trzeba dopiescic kompa w kwestii umocnienia najslabszych parametrow :D

i teraz pytanko: chce kupic hdd 250gb, mam juz 120gb samsunga SV1204H (cichy jak cholera), do seagate'a nie mam pewnosci.

narazie sie rozklada tak:

Samsung jest cichszy, ma mniej talezy, krotszy czas spin-up oraz ciagnie mniej pradu

Seagae ma krotszy czas dostepu i 16mb cache'u

 

http://arest.pl/index.php?inc=porownaj&amp...821&ID=4005

 

co polecicie? :)

[focus_]

Test dysków twardych 250 GB - powinien pomóc :)

Ja osobiście mam 2 Samsungi w lustrze i muszę powiedzieć, że o ile chrobotania raczej nie słychać o tyle to "buczenie" jest czaem wkurzające, szczególnie jak się ma cichego PC'ta.

[uosiu]

ok, szajsung 250gb juz siedzi w kieszeni lian-li podpiety do HPT370 jako /dev/hdf :P

i teraz zonk- raport smarta dla tego dysku-

[ root@smekta ] ~ #smartctl /dev/hdf --allsmartctl version 5.36 [i386-redhat-linux-gnu] Copyright (C) 2002-6 Bruce AllenHome page is http://smartmontools.sourceforge.net/=== START OF INFORMATION SECTION ===Device Model:	 SAMSUNG SP2514NSerial Number:	S08BJ1EP106486Firmware Version: VF100-50User Capacity:	250,059,350,016 bytesDevice is:		In smartctl database [for details use: -P show]ATA Version is:   7ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 4aLocal Time is:	Tue Mar 20 16:31:38 2007 CET==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details.SMART support is: Available - device has SMART capability.SMART support is: Enabled=== START OF READ SMART DATA SECTION ===SMART overall-health self-assessment test result: PASSEDGeneral SMART Values:Offline data collection status:  (0x02) Offline data collection activity										was completed without error.										Auto Offline Data Collection: Disabled.Self-test execution status:	  (   0) The previous self-test routine completed										without error or no self-test has ever										been run.Total time to complete Offlinedata collection:				 (5025) seconds.Offline data collectioncapabilities:					(0x5b) SMART execute Offline immediate.										Auto Offline data collection on/off support.										Suspend Offline collection upon new										command.										Offline surface scan supported.										Self-test supported.										No Conveyance Self-test supported.										Selective Self-test supported.SMART capabilities:			(0x0003) Saves SMART data before entering										power-saving mode.										Supports SMART auto save timer.Error logging capability:		(0x01) Error logging supported.										General Purpose Logging supported.Short self-test routinerecommended polling time:		(   1) minutes.Extended self-test routinerecommended polling time:		(  83) minutes.SMART Attributes Data Structure revision number: 16Vendor Specific SMART Attributes with Thresholds:ID# ATTRIBUTE_NAME		  FLAG	 VALUE WORST THRESH TYPE	  UPDATED  WHEN_FAILED RAW_VALUE  1 Raw_Read_Error_Rate	 0x000f   253   253   051	Pre-fail  Always	   -	   0  3 Spin_Up_Time			0x0007   253   253   025	Pre-fail  Always	   -	   6016  4 Start_Stop_Count		0x0032   100   100   000	Old_age   Always	   -	   7  5 Reallocated_Sector_Ct   0x0033   253   253   010	Pre-fail  Always	   -	   0  7 Seek_Error_Rate		 0x000f   253   253   051	Pre-fail  Always	   -	   0  8 Seek_Time_Performance   0x0025   253   253   015	Pre-fail  Offline	  -	   0  9 Power_On_Hours		  0x0032   253   253   000	Old_age   Always	   -	   4 10 Spin_Retry_Count		0x0033   253   253   051	Pre-fail  Always	   -	   0 11 Calibration_Retry_Count 0x0012   253   253   000	Old_age   Always	   -	   0 12 Power_Cycle_Count	   0x0032   100   100   000	Old_age   Always	   -	   6187 Unknown_Attribute	   0x0032   253   253   000	Old_age   Always	   -	   0190 Unknown_Attribute	   0x0022   124   124   000	Old_age   Always	   -	   38194 Temperature_Celsius	 0x0022   124   124   000	Old_age   Always	   -	   38195 Hardware_ECC_Recovered  0x001a   100   100   000	Old_age   Always	   -	   5936196 Reallocated_Event_Count 0x0032   253   253   000	Old_age   Always	   -	   0197 Current_Pending_Sector  0x0012   253   253   000	Old_age   Always	   -	   0198 Offline_Uncorrectable   0x0030   253   253   000	Old_age   Offline	  -	   0199 UDMA_CRC_Error_Count	0x003e   200   200   000	Old_age   Always	   -	   0200 Multi_Zone_Error_Rate   0x000a   253   253   000	Old_age   Always	   -	   0201 Soft_Read_Error_Rate	0x000a   253   253   000	Old_age   Always	   -	   0SMART Error Log Version: 1No Errors LoggedSMART Self-test log structure revision number 1No self-tests have been logged.  [To run self-tests, use: smartctl -t]SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1SMART Selective self-test log data structure revision number 0Warning: ATA Specification requires selective self-test log data structure revision number = 1 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS	1		0		0  Not_testing	2		0		0  Not_testing	3		0		0  Not_testing	4		0		0  Not_testing	5		0		0  Not_testingSelective self-test flags (0x0):  After scanning selected spans, do NOT read-scan remainder of disk.If Selective self-test is pending on power-up, resume after 0 minute delay.

dla porownania stary dysk samsunga SV1204H 120gb:

[ root@smekta ] ~ #smartctl /dev/hda --allsmartctl version 5.36 [i386-redhat-linux-gnu] Copyright (C) 2002-6 Bruce AllenHome page is http://smartmontools.sourceforge.net/=== START OF INFORMATION SECTION ===Device Model:	 SAMSUNG SV1204HSerial Number:	0504J1AW300586Firmware Version: RK100-15User Capacity:	120,060,444,672 bytesDevice is:		In smartctl database [for details use: -P show]ATA Version is:   6ATA Standard is:  ATA/ATAPI-6 T13 1410D revision 1Local Time is:	Tue Mar 20 16:50:53 2007 CETSMART support is: Available - device has SMART capability.SMART support is: Enabled=== START OF READ SMART DATA SECTION ===SMART overall-health self-assessment test result: PASSEDGeneral SMART Values:Offline data collection status:  (0x00) Offline data collection activity										was never started.										Auto Offline Data Collection: Disabled.Self-test execution status:	  (   0) The previous self-test routine completed										without error or no self-test has ever										been run.Total time to complete Offlinedata collection:				 (3840) seconds.Offline data collectioncapabilities:					(0x1b) SMART execute Offline immediate.										Auto Offline data collection on/off support.										Suspend Offline collection upon new										command.										Offline surface scan supported.										Self-test supported.										No Conveyance Self-test supported.										No Selective Self-test supported.SMART capabilities:			(0x0003) Saves SMART data before entering										power-saving mode.										Supports SMART auto save timer.Error logging capability:		(0x01) Error logging supported.										No General Purpose Logging support.Short self-test routinerecommended polling time:		(   1) minutes.Extended self-test routinerecommended polling time:		(  64) minutes.SMART Attributes Data Structure revision number: 16Vendor Specific SMART Attributes with Thresholds:ID# ATTRIBUTE_NAME		  FLAG	 VALUE WORST THRESH TYPE	  UPDATED  WHEN_FAILED RAW_VALUE  1 Raw_Read_Error_Rate	 0x000a   100   100   000	Old_age   Always	   -	   455  4 Start_Stop_Count		0x0032   094   094   000	Old_age   Always	   -	   6467  5 Reallocated_Sector_Ct   0x0033   253   253   009	Pre-fail  Always	   -	   0  7 Seek_Error_Rate		 0x000b   253   253   051	Pre-fail  Always	   -	   0  8 Seek_Time_Performance   0x0024   253   253   000	Old_age   Offline	  -	   0  9 Power_On_Half_Minutes   0x0032   099   099   000	Old_age   Always	   -	   9089h+04m 12 Power_Cycle_Count	   0x0032   097   097   000	Old_age   Always	   -	   3629194 Temperature_Celsius_x10 0x0022   154   115   000	Old_age   Always	   -	   33.3197 Current_Pending_Sector  0x0033   253   253   009	Pre-fail  Always	   -	   0198 Offline_Uncorrectable   0x0031   253   253   009	Pre-fail  Offline	  -	   0199 UDMA_CRC_Error_Count	0x000a   100   100   000	Old_age   Always	   -	   0200 Multi_Zone_Error_Rate   0x000b   100   100   051	Pre-fail  Always	   -	   0201 Soft_Read_Error_Rate	0x000b   100   100   051	Pre-fail  Always	   -	   0SMART Error Log Version: 1Warning: ATA error count 4072 inconsistent with error log pointer 5ATA Error Count: 4072 (device log contains only the most recent five errors)		CR = Command Register [HEX]		FR = Features Register [HEX]		SC = Sector Count Register [HEX]		SN = Sector Number Register [HEX]		CL = Cylinder Low Register [HEX]		CH = Cylinder High Register [HEX]		DH = Device/Head Register [HEX]		DC = Device Command Register [HEX]		ER = Error register [HEX]		ST = Status register [HEX]Powered_Up_Time is measured from power on, and printed asDDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,SS=sec, and sss=millisec. It "wraps" after 49.710 days.Error 4072 occurred at disk power-on lifetime: 9087 hours (378 days + 15 hours)  When the command that caused the error occurred, the device was active or idle.  After command completion occurred, registers were:  ER ST SC SN CL CH DH  -- -- -- -- -- -- --  04 51 05 01 00 00 a0  Error: ABRT  Commands leading to the command that caused the error were:  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name  -- -- -- -- -- -- -- --  ----------------  --------------------  a1 00 05 01 00 00 a0 00	  00:00:07.000  IDENTIFY PACKET DEVICE  e0 00 00 00 00 00 a0 00	  00:45:14.000  STANDBY IMMEDIATE  c8 00 08 0c 70 dc e4 00	  00:45:14.000  READ DMA  c8 00 08 24 70 e0 e4 00	  00:45:14.000  READ DMA  c8 00 08 54 72 7b e4 00	  00:45:14.000  READ DMAError 4071 occurred at disk power-on lifetime: 9087 hours (378 days + 15 hours)  When the command that caused the error occurred, the device was active or idle.  After command completion occurred, registers were:  ER ST SC SN CL CH DH  -- -- -- -- -- -- --  04 51 05 01 00 00 a0  Error: ABRT  Commands leading to the command that caused the error were:  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name  -- -- -- -- -- -- -- --  ----------------  --------------------  a1 00 05 01 00 00 a0 00	  00:00:07.000  IDENTIFY PACKET DEVICE  e0 00 00 00 00 00 a0 00	  00:29:45.000  STANDBY IMMEDIATE  c8 00 08 7c 70 e6 e4 00	  00:29:45.000  READ DMA  c8 00 08 ec 70 d7 e4 00	  00:29:45.000  READ DMA  c8 00 08 04 70 cc e4 00	  00:29:45.000  READ DMAError 4070 occurred at disk power-on lifetime: 9086 hours (378 days + 14 hours)  When the command that caused the error occurred, the device was active or idle.  After command completion occurred, registers were:  ER ST SC SN CL CH DH  -- -- -- -- -- -- --  04 51 05 01 00 00 a0  Error: ABRT  Commands leading to the command that caused the error were:  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name  -- -- -- -- -- -- -- --  ----------------  --------------------  a1 00 05 01 00 00 a0 00	  00:00:07.000  IDENTIFY PACKET DEVICE  e0 00 00 00 00 00 e0 00	  02:29:45.000  STANDBY IMMEDIATE  e7 00 00 00 00 00 e0 00	  02:29:45.000  FLUSH CACHE  c8 00 38 1f 1c 61 e1 00	  02:28:36.000  READ DMA  c8 00 08 17 1c 61 e1 00	  02:28:35.000  READ DMAError 4069 occurred at disk power-on lifetime: 9086 hours (378 days + 14 hours)  When the command that caused the error occurred, the device was active or idle.  After command completion occurred, registers were:  ER ST SC SN CL CH DH  -- -- -- -- -- -- --  04 51 05 01 00 00 a0  Error: ABRT  Commands leading to the command that caused the error were:  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name  -- -- -- -- -- -- -- --  ----------------  --------------------  a1 00 05 01 00 00 a0 00	  02:00:08.000  IDENTIFY PACKET DEVICE  00 00 01 01 00 00 00 00	  01:59:57.000  NOP [Abort queued commands]  e7 00 00 00 00 00 e0 00	  01:59:57.000  FLUSH CACHE  c8 00 08 47 60 00 e0 00	  01:56:52.000  READ DMA  c8 00 08 54 20 2f e4 00	  01:56:52.000  READ DMAError 4068 occurred at disk power-on lifetime: 9086 hours (378 days + 14 hours)  When the command that caused the error occurred, the device was active or idle.  After command completion occurred, registers were:  ER ST SC SN CL CH DH  -- -- -- -- -- -- --  04 51 05 01 00 00 a0  Error: ABRT  Commands leading to the command that caused the error were:  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name  -- -- -- -- -- -- -- --  ----------------  --------------------  a1 00 05 01 00 00 a0 00	  01:54:30.000  IDENTIFY PACKET DEVICE  00 00 01 01 00 00 00 00	  01:54:19.000  NOP [Abort queued commands]  e7 00 00 00 00 00 e0 00	  01:54:19.000  FLUSH CACHE  c8 00 08 c9 40 2b e1 00	  01:53:28.000  READ DMA  c8 00 08 e1 40 4e e1 00	  01:53:28.000  READ DMASMART Self-test log structure revision number 1No self-tests have been logged.  [To run self-tests, use: smartctl -t]Device does not support Selective Self Tests/Logging

Edytowane 20 Marca 2007 przez uosiu