Skocz do zawartości

Rekomendowane odpowiedzi

Witam.Prosze o sprawdzenie smart dysku.Dysk padł.Temat do zamknięcia.

 

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 2.5" HDD MK..65GSX
Device Model:     TOSHIBA MK3265GSX
Serial Number:    70P7C6G6T
LU WWN Device Id: 5 000039 2a360a344
Firmware Version: GJ002H
User Capacity:    320,072,933,376 bytes [320 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Thu Aug 11 10:40:03 2016 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         (  120) seconds.
Offline data collection
capabilities:              (0x5b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      ( 104) minutes.
SCT capabilities:            (0x003d)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0027   100   100   001    Pre-fail  Always       -       1123
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       2947
  5 Reallocated_Sector_Ct   0x0033   100   100   050    Pre-fail  Always       -       286
  7 Seek_Error_Rate         0x000b   100   100   050    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0032   091   091   000    Old_age   Always       -       3978
 10 Spin_Retry_Count        0x0033   158   100   030    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       2929
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       42
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       76
193 Load_Cycle_Count        0x0032   095   095   000    Old_age   Always       -       57249
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       33 (Min/Max 9/45)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       145
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       557
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       1
220 Disk_Shift              0x0002   100   100   000    Old_age   Always       -       53
222 Loaded_Hours            0x0032   093   093   000    Old_age   Always       -       3116
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
224 Load_Friction           0x0022   100   100   000    Old_age   Always       -       0
226 Load-in_Time            0x0026   100   100   000    Old_age   Always       -       332
240 Head_Flying_Hours       0x0001   100   100   001    Pre-fail  Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 2672 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2672 occurred at disk power-on lifetime: 3978 hours (165 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 0a 9e 58 42 60  Error: UNC at LBA = 0x0042589e = 4348062

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 01 08 9e 58 42 40 08      00:34:23.459  READ FPDMA QUEUED
  60 01 00 9f 58 42 40 08      00:34:23.459  READ FPDMA QUEUED
  ef 10 02 00 00 00 a0 00      00:34:23.459  SET FEATURES [Reserved for Serial ATA]
  27 00 00 00 00 00 e0 00      00:34:23.459  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      00:34:23.458  IDENTIFY DEVICE

Error 2671 occurred at disk power-on lifetime: 3978 hours (165 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 02 9d 58 42 60  Error: UNC at LBA = 0x0042589d = 4348061

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 01 10 9f 58 42 40 08      00:34:15.648  READ FPDMA QUEUED
  60 01 08 9e 58 42 40 08      00:34:15.648  READ FPDMA QUEUED
  60 01 00 9d 58 42 40 08      00:34:15.648  READ FPDMA QUEUED
  ef 10 02 00 00 00 a0 00      00:34:15.648  SET FEATURES [Reserved for Serial ATA]
  27 00 00 00 00 00 e0 00      00:34:15.648  READ NATIVE MAX ADDRESS EXT

Error 2670 occurred at disk power-on lifetime: 3978 hours (165 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 1a 9c 58 42 60  Error: UNC at LBA = 0x0042589c = 4348060

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 01 18 9c 58 42 40 08      00:34:07.848  READ FPDMA QUEUED
  60 01 10 9d 58 42 40 08      00:34:07.848  READ FPDMA QUEUED
  60 01 08 9e 58 42 40 08      00:34:07.848  READ FPDMA QUEUED
  60 01 00 9f 58 42 40 08      00:34:07.848  READ FPDMA QUEUED
  ef 10 02 00 00 00 a0 00      00:34:07.847  SET FEATURES [Reserved for Serial ATA]

Error 2669 occurred at disk power-on lifetime: 3978 hours (165 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 02 9b 58 42 60  Error: UNC at LBA = 0x0042589b = 4348059

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 01 20 9f 58 42 40 08      00:34:00.036  READ FPDMA QUEUED
  60 01 18 9e 58 42 40 08      00:34:00.036  READ FPDMA QUEUED
  60 01 10 9d 58 42 40 08      00:34:00.036  READ FPDMA QUEUED
  60 01 08 9c 58 42 40 08      00:34:00.036  READ FPDMA QUEUED
  60 01 00 9b 58 42 40 08      00:34:00.036  READ FPDMA QUEUED

Error 2668 occurred at disk power-on lifetime: 3978 hours (165 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 2a 9a 58 42 60  Error: UNC at LBA = 0x0042589a = 4348058

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 01 28 9a 58 42 40 08      00:33:52.225  READ FPDMA QUEUED
  60 01 20 9b 58 42 40 08      00:33:52.225  READ FPDMA QUEUED
  60 01 18 9c 58 42 40 08      00:33:52.225  READ FPDMA QUEUED
  60 01 10 9d 58 42 40 08      00:33:52.225  READ FPDMA QUEUED
  60 01 08 9e 58 42 40 08      00:33:52.225  READ FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      3968         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Edytowane przez and2352

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

Zerknijcie proszę na te dwa dyski:

 [ SAMSUNG HD502HJ ]

    01  Raw Read Error Rate                  51   100  100           9  OK: wartość w normie
    02  Throughput Performance               0    252  252           0  OK: zawsze pozytywnie
    03  Spinup Time                          25   82   82         5462  OK: wartość w normie
    04  Start/Stop Count                     0    94   94         6121  OK: zawsze pozytywnie
    05  Reallocated Sector Count             10   252  252           0  OK: wartość w normie
    07  Seek Error Rate                      51   252  252           0  OK: wartość w normie
    08  Seek Time Performance                15   252  252           0  OK: wartość w normie
    09  Power-On Time Count                  0    100  100       14539  OK: zawsze pozytywnie
    0A  Spinup Retry Count                   51   252  252           0  OK: wartość w normie
    0B  Calibration Retry Count              0    252  252           0  OK: zawsze pozytywnie
    0C  Power Cycle Count                    0    95   95         6006  OK: zawsze pozytywnie
    BF  Mechanical Shock                     0    100  100           9  OK: zawsze pozytywnie
    C0  Power-Off Retract Count              0    252  252           0  OK: zawsze pozytywnie
    C2  Temperature                          0    64   56       14, 26  OK: zawsze pozytywnie
    C3  Hardware ECC Recovered               0    100  100           0  OK: zawsze pozytywnie
    C4  Reallocation Event Count             0    252  252           0  OK: zawsze pozytywnie
    C5  Current Pending Sector Count         0    252  252           0  OK: zawsze pozytywnie
    C6  Offline Uncorrectable Sector Count   0    252  252           0  OK: zawsze pozytywnie
    C7  Ultra ATA CRC Error Rate             0    87   1          7253  OK: zawsze pozytywnie
    C8  Write Error Rate                     0    100  100         751  OK: zawsze pozytywnie
    DF  Load/Unload Retry Count              0    252  252           0  OK: zawsze pozytywnie
    E1  Load/Unload Cycle Count              0    100  100        6271  OK: zawsze pozytywnie

  [ WDC WD5000AAKX ]

    01  Raw Read Error Rate                  51   200  200        1281  OK: wartość w normie
    03  Spinup Time                          21   163  138        2816  OK: wartość w normie
    04  Start/Stop Count                     0    97   97         3043  OK: zawsze pozytywnie
    05  Reallocated Sector Count             140  200  200           0  OK: wartość w normie
    07  Seek Error Rate                      0    200  200           0  OK: zawsze pozytywnie
    09  Power-On Time Count                  0    92   92         6186  OK: zawsze pozytywnie
    0A  Spinup Retry Count                   0    100  100           0  OK: zawsze pozytywnie
    0B  Calibration Retry Count              0    100  100           0  OK: zawsze pozytywnie
    0C  Power Cycle Count                    0    97   97         3041  OK: zawsze pozytywnie
    C0  Power-Off Retract Count              0    200  200         201  OK: zawsze pozytywnie
    C1  Load/Unload Cycle Count              0    200  200        2841  OK: zawsze pozytywnie
    C2  Temperature                          0    114  99           29  OK: zawsze pozytywnie
    C4  Reallocation Event Count             0    200  200           0  OK: zawsze pozytywnie
    C5  Current Pending Sector Count         0    200  200          57  OK: zawsze pozytywnie
    C6  Offline Uncorrectable Sector Count   0    200  200           1  OK: zawsze pozytywnie
    C7  Ultra ATA CRC Error Rate             0    200  200           0  OK: zawsze pozytywnie
    C8  Write Error Rate                     0    200  200           1  OK: zawsze pozytywnie

W Samsungu niepokoi mnie C8. W WD 01, C6 i C8... Szmelc?

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

Hej wszystkim. Ostatnio dorosłem do tego (a właściwie mój śmietnik na dyskach) że wypadało dostawić kolejny dysk do skrzynki... 

I wszystko było fajnie aż odpaliłem CrystalDiskInfo i zobaczyłem że SMART marudzi. Zastanawiam się czy jest się czego bać?

 

1582736fef3f1fbHDD_02_EN.png

 

Dysk jak widać ma niecałe 2 miesiące pracy w kompie a SMART już narzeka i zastanawiam się czy to bardzo istotne błędy

Dla porównania 2gi dysk który mam już kilka lat (chyba z 5)

 

15827346a623c7eHDD_01_EN.png

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

w tych dwóch masz reloki (ehh seagate, czemu nie jestem zdziwiony) pytanie czy to błędy logiczne, w ostateczności możesz sprawdzić MHDD (lub gwarancja)

tu masz tutka:

http://darmowyinternet.net/forum/temat-naprawa-dysku-twardego-mhdd-tutorial_751

Jak na razie kontakt ze sprzedawcą i weryfikacja co dalej. Po zassaniu SeaTools nie przeszedł Short Disk Self Test więc raczej nie ma się co szczypać jak dysk ma raptem 2 miechy.

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

Hej.

Dysk leciwy. Wymieniać już czy jeszcze można się wstrzymać?

HD Tune: ST9500325AS Health

ID                               Current  Worst    ThresholdData       Status   
(01) Raw Read Error Rate         118      99       6        178211479  Ok       
(03) Spin Up Time                98       98       0        0          Ok       
(04) Start/Stop Count            98       98       20       2457       Ok       
(05) Reallocated Sector Count    100      100      36       0          Ok       
(07) Seek Error Rate             85       60       30       338196322  Ok       
(09) Power On Hours Count        88       88       0        10909      Ok       
(0A) Spin Retry Count            100      100      97       0          Ok       
(0C) Power Cycle Count           98       98       20       2377       Ok       
(B8) (unknown attribute)         100      100      99       0          Ok       
(BB) (unknown attribute)         100      100      0        0          Ok       
(BC) (unknown attribute)         100      99       0        8          Ok       
(BD) (unknown attribute)         100      100      0        0          Ok       
(BE) Airflow Temperature         69       56       45       538443807  Ok       
(BF) G-sense Error Rate          100      100      0        195        Ok       
(C0) Power Off Retract Count     100      100      0        20         Ok       
(C1) Load Cycle Count            55       55       0        91370      Ok       
(C2) Temperature                 31       44       0        31         Ok       
(C3) Hardware ECC Recovered      51       30       0        178211479  Ok       
(C5) Current Pending Sector      100      100      0        0          Ok       
(C6) Offline Uncorrectable       100      100      0        0          Ok       
(C7) Ultra DMA CRC Error Count   200      200      0        0          Ok       
(FE) (unknown attribute)         100      100      0        0          Ok       

Power On Time         : 10909
Health Status         : Ok

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

Cześć.

 

Ostatnio kupiłem używanego laptopa i okazało się że dysk był walnięty więc sprzedawca wymienił mi na inny też używany. Możecie mi powiedzieć w jakim stanie jest ten dysk.

 

http://imgur.com/a/MkxhF

 

tak średnio bym powiedział, trochę błędów jest, może nie krytycznych, ale na pewno nie jest to stan idealny

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

Witam

czy do nowego komputera jest sens wkładać taki dysk:

gEiBKF0.png

 

W ciągu kilku miesięcy byłby on zmieniony. Obecnie brak funduszy na zakup innego. W szafce gdzieś powinienem mieć jakieś inne, ale jeśli ten byłby zdatny wytrzymać te 3-4 miesiące to bym go zostawił. Na komputerze nie będzie jakiś ultra ważnych danych; głównie jakieś gierki.

 

Z góry dziękuję za pomoc

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

Dołącz do dyskusji

Możesz dodać zawartość już teraz a zarejestrować się później. Jeśli posiadasz już konto, zaloguj się aby dodać zawartość za jego pomocą.

Gość
Dodaj odpowiedź do tematu...

×   Wklejono zawartość z formatowaniem.   Przywróć formatowanie

  Dozwolonych jest tylko 75 emoji.

×   Odnośnik został automatycznie osadzony.   Przywróć wyświetlanie jako odnośnik

×   Przywrócono poprzednią zawartość.   Wyczyść edytor

×   Nie możesz bezpośrednio wkleić grafiki. Dodaj lub załącz grafiki z adresu URL.

Ładowanie


×
×
  • Dodaj nową pozycję...