Jump to content
Zigi

Suse/novel Podczas Reinstalacji Umarł Demon Cupsd

Recommended Posts

Och jak ja kocham ten system grr...

Przy reinstalacji cups-a przy użyciu opcji przeinstaluj z yasta (dział druarek) wyleciał sobie w kosmos i już nie wrócił. Innymi słowy otrzymuję tuz po skopiowaniu plików przez automat - przy smokonfiguracji komunikat o tym iz demon zdechł. Ręczny restart nie pomaga. Co gorsza nie mam dostępu do płytki z pakietami tegoż SuseNovela.

Nie wiecie co można ewentualnie z tym fantem zrobić?

Share this post


Link to post
Share on other sites

pokaż logi (/var/log/cups/error_log)

Chwilowo (do poniedziałku) nie mam jak ich sprawdzić, a ponieważ zrobił mi takowy numer w chwili gdy musiałem skończyć zabawę to udało mi się jedynie sprawdzić co wywala po próbie odpalenia z palca: błąd numer 1.

Share this post


Link to post
Share on other sites

Ciąg dalszy...

 

 

Zachęcony waszymi nielicznymi radami :) postanowiłem rozwikłać zagadkę ale wcześnie zabrałem się za instalacji na bliźniaczym kompie również wyposażony w LinuxNovel 9 (czyli innymi słowy Suse po zmianie właściciela). Odpaliłem yasta moduł drukarki dodałem kolejkę dla drukarki sieciowej podając pliczek sterownika i wykonałem test który można wykonać jeszcze przed napisaniem całej konfiguracji. Na tym etapie zadziałało poprawnie - testowe stronki się wydrukowały prawidłowo. Niestety radość była krótka, bo po naciśnięciu przycisku mającego całość zabawy zatwierdzić otrzymałem komunikat identyczny z tym na kompie 1: demon umarł. I taki zdechły już pozostał identycznie jak na kompie 1 mimo ze tutaj nic kompletnie z nim więcej nie robiłem. Ustawień nie zapamiętał. Przez 127.0.0.1:631 też się wejść na niego nie da bo nie odpowiada.

Gdyby sterownik ppd drukarki nie zadziałał w teście to powiedziałbym iż to jego wina ale tak to już kompletnie nie wiem o co mu biega. Czyżby trzeba było ręcznie grzebać w cups.config?

 

error_log

» Naciśnij, żeby pokazać/ukryć tekst oznaczony jako spoiler... «

I [10/Sep/2007:13:41:10 +0200] Listening to 0:631

I [10/Sep/2007:13:41:10 +0200] Loaded configuration file "/etc/cups/cupsd.conf"

I [10/Sep/2007:13:41:10 +0200] Configured for up to 100 clients.

I [10/Sep/2007:13:41:10 +0200] Allowing up to 100 client connections per host.

I [10/Sep/2007:13:41:10 +0200] Full reload is required.

I [10/Sep/2007:13:41:13 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 3627 PPDs...

I [10/Sep/2007:13:41:14 +0200] LoadPPDs: No new or changed PPDs...

I [10/Sep/2007:13:41:14 +0200] Full reload complete.

I [10/Sep/2007:13:42:08 +0200] Scheduler shutting down normally.

I [10/Sep/2007:13:43:43 +0200] Listening to 0:631

I [10/Sep/2007:13:43:43 +0200] Loaded configuration file "/etc/cups/cupsd.conf"

I [10/Sep/2007:13:43:43 +0200] Configured for up to 100 clients.

I [10/Sep/2007:13:43:43 +0200] Allowing up to 100 client connections per host.

I [10/Sep/2007:13:43:43 +0200] Full reload is required.

I [10/Sep/2007:13:43:45 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 3627 PPDs...

I [10/Sep/2007:13:43:46 +0200] LoadPPDs: No new or changed PPDs...

I [10/Sep/2007:13:43:46 +0200] Full reload complete.

I [10/Sep/2007:13:50:18 +0200] Scheduler shutting down normally.

I [10/Sep/2007:13:50:18 +0200] Listening to 0:631

I [10/Sep/2007:13:50:18 +0200] Loaded configuration file "/etc/cups/cupsd.conf"

I [10/Sep/2007:13:50:18 +0200] Configured for up to 100 clients.

I [10/Sep/2007:13:50:18 +0200] Allowing up to 100 client connections per host.

I [10/Sep/2007:13:50:18 +0200] Full reload is required.

I [10/Sep/2007:13:50:19 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 3627 PPDs...

I [10/Sep/2007:13:50:19 +0200] LoadPPDs: Wrote "/etc/cups/ppds.dat", 3628 PPDs...

I [10/Sep/2007:13:50:19 +0200] Full reload complete.

I [10/Sep/2007:13:50:20 +0200] Setting y2test device-uri to "lpd://192.168.0.115/drukarka" (was "file:/dev/null".)

I [10/Sep/2007:13:50:20 +0200] Setting y2test printer-is-accepting-jobs to 1 (was 0.)

I [10/Sep/2007:13:50:20 +0200] Setting y2test printer-state to 3 (was 5.)

I [10/Sep/2007:13:50:20 +0200] Saving printers.conf...

I [10/Sep/2007:13:50:20 +0200] New printer 'y2test' added by 'root'.

I [10/Sep/2007:13:50:20 +0200] Adding start banner page "none" to job 1.

I [10/Sep/2007:13:50:20 +0200] Adding end banner page "none" to job 1.

I [10/Sep/2007:13:50:20 +0200] Job 1 queued on 'y2test' by 'root'.

I [10/Sep/2007:13:50:20 +0200] Started filter /usr/lib/cups/filter/texttops (PID 7584) for job 1.

I [10/Sep/2007:13:50:20 +0200] Started filter /usr/lib/cups/filter/pstops (PID 7585) for job 1.

I [10/Sep/2007:13:50:20 +0200] Started filter /usr/lib/cups/filter/foomatic-rip (PID 7586) for job 1.

I [10/Sep/2007:13:50:20 +0200] Started backend /usr/lib/cups/backend/lpd (PID 7587) for job 1.

I [10/Sep/2007:13:51:26 +0200] Printer 'y2test' deleted by 'root'.

I [10/Sep/2007:13:51:26 +0200] Saving printers.conf...

I [10/Sep/2007:13:52:33 +0200] Scheduler shutting down normally.

I [10/Sep/2007:13:52:33 +0200] Listening to 0:631

I [10/Sep/2007:13:52:33 +0200] Loaded configuration file "/etc/cups/cupsd.conf"

I [10/Sep/2007:13:52:33 +0200] Configured for up to 100 clients.

I [10/Sep/2007:13:52:33 +0200] Allowing up to 100 client connections per host.

I [10/Sep/2007:13:52:33 +0200] Full reload is required.

I [10/Sep/2007:13:52:33 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 3628 PPDs...

I [10/Sep/2007:13:52:33 +0200] LoadPPDs: Wrote "/etc/cups/ppds.dat", 3629 PPDs...

I [10/Sep/2007:13:52:33 +0200] Full reload complete.

I [10/Sep/2007:13:52:33 +0200] Setting y2test device-uri to "lpd://192.168.0.115/drukarka" (was "file:/dev/null".)

I [10/Sep/2007:13:52:33 +0200] Setting y2test printer-is-accepting-jobs to 1 (was 0.)

I [10/Sep/2007:13:52:33 +0200] Setting y2test printer-state to 3 (was 5.)

I [10/Sep/2007:13:52:33 +0200] Saving printers.conf...

I [10/Sep/2007:13:52:33 +0200] New printer 'y2test' added by 'root'.

I [10/Sep/2007:13:52:34 +0200] Adding start banner page "none" to job 1.

I [10/Sep/2007:13:52:34 +0200] Adding end banner page "none" to job 1.

I [10/Sep/2007:13:52:34 +0200] Job 1 queued on 'y2test' by 'root'.

I [10/Sep/2007:13:52:34 +0200] Started filter /usr/lib/cups/filter/texttops (PID 7748) for job 1.

I [10/Sep/2007:13:52:34 +0200] Started filter /usr/lib/cups/filter/pstops (PID 7749) for job 1.

I [10/Sep/2007:13:52:34 +0200] Started filter /usr/lib/cups/filter/foomatic-rip (PID 7750) for job 1.

I [10/Sep/2007:13:52:34 +0200] Started backend /usr/lib/cups/backend/lpd (PID 7751) for job 1.

I [10/Sep/2007:13:53:04 +0200] Printer 'y2test' deleted by 'root'.

I [10/Sep/2007:13:53:04 +0200] Saving printers.conf...

I [10/Sep/2007:13:53:11 +0200] Scheduler shutting down normally.

I [10/Sep/2007:13:53:11 +0200] Listening to 0:631

I [10/Sep/2007:13:53:11 +0200] Loaded configuration file "/etc/cups/cupsd.conf"

I [10/Sep/2007:13:53:11 +0200] Configured for up to 100 clients.

I [10/Sep/2007:13:53:11 +0200] Allowing up to 100 client connections per host.

I [10/Sep/2007:13:53:11 +0200] Full reload is required.

I [10/Sep/2007:13:53:12 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 3629 PPDs...

I [10/Sep/2007:13:53:12 +0200] LoadPPDs: No new or changed PPDs...

I [10/Sep/2007:13:53:12 +0200] Full reload complete.

I [10/Sep/2007:13:53:12 +0200] Setting y2test device-uri to "lpd://192.168.0.115/drukarka" (was "file:/dev/null".)

I [10/Sep/2007:13:53:12 +0200] Setting y2test printer-is-accepting-jobs to 1 (was 0.)

I [10/Sep/2007:13:53:12 +0200] Setting y2test printer-state to 3 (was 5.)

I [10/Sep/2007:13:53:12 +0200] Saving printers.conf...

I [10/Sep/2007:13:53:12 +0200] New printer 'y2test' added by 'root'.

I [10/Sep/2007:13:53:12 +0200] Adding start banner page "none" to job 1.

I [10/Sep/2007:13:53:12 +0200] Adding end banner page "none" to job 1.

I [10/Sep/2007:13:53:12 +0200] Job 1 queued on 'y2test' by 'root'.

I [10/Sep/2007:13:53:12 +0200] Started filter /usr/lib/cups/filter/pstops (PID 7874) for job 1.

I [10/Sep/2007:13:53:12 +0200] Started filter /usr/lib/cups/filter/foomatic-rip (PID 7875) for job 1.

I [10/Sep/2007:13:53:12 +0200] Started backend /usr/lib/cups/backend/lpd (PID 7876) for job 1.

I [10/Sep/2007:13:54:05 +0200] Printer 'y2test' deleted by 'root'.

I [10/Sep/2007:13:54:05 +0200] Saving printers.conf...

I [10/Sep/2007:13:54:19 +0200] Scheduler shutting down normally.

I [10/Sep/2007:13:54:19 +0200] Listening to 0:631

E [10/Sep/2007:13:54:19 +0200] Unknown Location directive # on line 811.

I [10/Sep/2007:13:54:19 +0200] Loaded configuration file "/etc/cups/cupsd.conf"

I [10/Sep/2007:13:54:19 +0200] Configured for up to 100 clients.

I [10/Sep/2007:13:54:19 +0200] Allowing up to 100 client connections per host.

I [10/Sep/2007:13:54:19 +0200] Full reload is required.

I [10/Sep/2007:13:54:19 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 3629 PPDs...

I [10/Sep/2007:13:54:19 +0200] LoadPPDs: No new or changed PPDs...

I [10/Sep/2007:13:54:19 +0200] Full reload complete.

I [10/Sep/2007:13:54:20 +0200] Setting drukarka device-uri to "lpd://192.168.0.115/drukarka" (was "file:/dev/null".)

I [10/Sep/2007:13:54:20 +0200] Setting drukarka printer-is-accepting-jobs to 1 (was 0.)

I [10/Sep/2007:13:54:20 +0200] Setting drukarka printer-state to 3 (was 5.)

I [10/Sep/2007:13:54:20 +0200] Saving printers.conf...

I [10/Sep/2007:13:54:20 +0200] New printer 'drukarka' added by 'root'.

I [10/Sep/2007:13:54:20 +0200] Saving printers.conf...

I [10/Sep/2007:13:54:20 +0200] Saving classes.conf...

I [10/Sep/2007:13:54:20 +0200] Default destination set to 'drukarka' by 'root'.

I [10/Sep/2007:13:54:20 +0200] Scheduler shutting down normally.

I [10/Sep/2007:13:54:20 +0200] Listening to 0:631

E [10/Sep/2007:13:54:20 +0200] Unknown Location directive # on line 811.

I [10/Sep/2007:13:54:20 +0200] Loaded configuration file "/etc/cups/cupsd.conf"

I [10/Sep/2007:13:54:20 +0200] Configured for up to 100 clients.

I [10/Sep/2007:13:54:20 +0200] Allowing up to 100 client connections per host.

I [10/Sep/2007:13:54:20 +0200] Full reload is required.

I [10/Sep/2007:13:54:20 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 3629 PPDs...

I [10/Sep/2007:13:54:20 +0200] LoadPPDs: No new or changed PPDs...

I [10/Sep/2007:13:54:20 +0200] Full reload complete.

I [10/Sep/2007:13:54:24 +0200] Scheduler shutting down normally.

I [10/Sep/2007:13:54:24 +0200] Listening to 0:631

E [10/Sep/2007:13:54:24 +0200] Unknown Location directive # on line 816.

E [10/Sep/2007:13:54:24 +0200] Unknown Location directive # on line 831.

I [10/Sep/2007:13:54:24 +0200] Listening to 0:631

I [10/Sep/2007:13:54:24 +0200] Loaded configuration file "/etc/cups/cupsd.conf"

I [10/Sep/2007:13:54:24 +0200] Configured for up to 100 clients.

I [10/Sep/2007:13:54:24 +0200] Allowing up to 100 client connections per host.

I [10/Sep/2007:13:54:24 +0200] Full reload is required.

I [10/Sep/2007:13:54:24 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 3629 PPDs...

I [10/Sep/2007:13:54:24 +0200] LoadPPDs: No new or changed PPDs...

I [10/Sep/2007:13:54:24 +0200] Full reload complete.

E [10/Sep/2007:13:54:24 +0200] StartListening: Unable to bind socket - Adres jest już w użyciu.

I [10/Sep/2007:13:54:28 +0200] Listening to 0:631

E [10/Sep/2007:13:54:28 +0200] Unknown Location directive # on line 816.

E [10/Sep/2007:13:54:28 +0200] Unknown Location directive # on line 831.

I [10/Sep/2007:13:54:28 +0200] Listening to 0:631

I [10/Sep/2007:13:54:28 +0200] Loaded configuration file "/etc/cups/cupsd.conf"

I [10/Sep/2007:13:54:28 +0200] Configured for up to 100 clients.

I [10/Sep/2007:13:54:28 +0200] Allowing up to 100 client connections per host.

I [10/Sep/2007:13:54:28 +0200] Full reload is required.

I [10/Sep/2007:13:54:29 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 3629 PPDs...

I [10/Sep/2007:13:54:29 +0200] LoadPPDs: No new or changed PPDs...

I [10/Sep/2007:13:54:29 +0200] Full reload complete.

E [10/Sep/2007:13:54:29 +0200] StartListening: Unable to bind socket - Adres jest już w użyciu.

I [10/Sep/2007:13:54:37 +0200] Listening to 0:631

E [10/Sep/2007:13:54:37 +0200] Unknown Location directive # on line 816.

E [10/Sep/2007:13:54:37 +0200] Unknown Location directive # on line 831.

I [10/Sep/2007:13:54:37 +0200] Listening to 0:631

I [10/Sep/2007:13:54:37 +0200] Loaded configuration file "/etc/cups/cupsd.conf"

I [10/Sep/2007:13:54:37 +0200] Configured for up to 100 clients.

I [10/Sep/2007:13:54:37 +0200] Allowing up to 100 client connections per host.

I [10/Sep/2007:13:54:37 +0200] Full reload is required.

I [10/Sep/2007:13:54:37 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 3629 PPDs...

I [10/Sep/2007:13:54:37 +0200] LoadPPDs: No new or changed PPDs...

I [10/Sep/2007:13:54:37 +0200] Full reload complete.

E [10/Sep/2007:13:54:37 +0200] StartListening: Unable to bind socket - Adres jest już w użyciu.

I [10/Sep/2007:13:56:35 +0200] Listening to 0:631

E [10/Sep/2007:13:56:35 +0200] Unknown Location directive # on line 816.

E [10/Sep/2007:13:56:35 +0200] Unknown Location directive # on line 831.

I [10/Sep/2007:13:56:35 +0200] Listening to 0:631

I [10/Sep/2007:13:56:35 +0200] Loaded configuration file "/etc/cups/cupsd.conf"

I [10/Sep/2007:13:56:35 +0200] Configured for up to 100 clients.

I [10/Sep/2007:13:56:35 +0200] Allowing up to 100 client connections per host.

I [10/Sep/2007:13:56:35 +0200] Full reload is required.

I [10/Sep/2007:13:56:35 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 3629 PPDs...

I [10/Sep/2007:13:56:35 +0200] LoadPPDs: No new or changed PPDs...

I [10/Sep/2007:13:56:35 +0200] Full reload complete.

E [10/Sep/2007:13:56:35 +0200] StartListening: Unable to bind socket - Adres jest już w użyciu.

I [10/Sep/2007:13:56:48 +0200] Listening to 0:631

E [10/Sep/2007:13:56:48 +0200] Unknown Location directive # on line 816.

E [10/Sep/2007:13:56:48 +0200] Unknown Location directive # on line 831.

I [10/Sep/2007:13:56:48 +0200] Listening to 0:631

I [10/Sep/2007:13:56:48 +0200] Loaded configuration file "/etc/cups/cupsd.conf"

I [10/Sep/2007:13:56:48 +0200] Configured for up to 100 clients.

I [10/Sep/2007:13:56:48 +0200] Allowing up to 100 client connections per host.

I [10/Sep/2007:13:56:48 +0200] Full reload is required.

I [10/Sep/2007:13:56:49 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 3629 PPDs...

I [10/Sep/2007:13:56:49 +0200] LoadPPDs: No new or changed PPDs...

I [10/Sep/2007:13:56:49 +0200] Full reload complete.

E [10/Sep/2007:13:56:49 +0200] StartListening: Unable to bind socket - Adres jest już w użyciu.

I [10/Sep/2007:13:58:48 +0200] Listening to 0:631

E [10/Sep/2007:13:58:48 +0200] Unknown Location directive # on line 816.

E [10/Sep/2007:13:58:48 +0200] Unknown Location directive # on line 831.

I [10/Sep/2007:13:58:48 +0200] Listening to 0:631

I [10/Sep/2007:13:58:48 +0200] Loaded configuration file "/etc/cups/cupsd.conf"

I [10/Sep/2007:13:58:48 +0200] Configured for up to 100 clients.

I [10/Sep/2007:13:58:48 +0200] Allowing up to 100 client connections per host.

I [10/Sep/2007:13:58:48 +0200] Full reload is required.

I [10/Sep/2007:13:58:48 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 3629 PPDs...

I [10/Sep/2007:13:58:48 +0200] LoadPPDs: No new or changed PPDs...

I [10/Sep/2007:13:58:48 +0200] Full reload complete.

E [10/Sep/2007:13:58:48 +0200] StartListening: Unable to bind socket - Adres jest już w użyciu.

I [10/Sep/2007:14:00:43 +0200] Listening to 0:631

E [10/Sep/2007:14:00:43 +0200] Unknown Location directive # on line 816.

E [10/Sep/2007:14:00:43 +0200] Unknown Location directive # on line 831.

I [10/Sep/2007:14:00:43 +0200] Listening to 0:631

I [10/Sep/2007:14:00:43 +0200] Loaded configuration file "/etc/cups/cupsd.conf"

I [10/Sep/2007:14:00:43 +0200] Configured for up to 100 clients.

I [10/Sep/2007:14:00:43 +0200] Allowing up to 100 client connections per host.

I [10/Sep/2007:14:00:43 +0200] Full reload is required.

I [10/Sep/2007:14:00:44 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 3629 PPDs...

I [10/Sep/2007:14:00:44 +0200] LoadPPDs: No new or changed PPDs...

I [10/Sep/2007:14:00:44 +0200] Full reload complete.

E [10/Sep/2007:14:00:44 +0200] StartListening: Unable to bind socket - Adres jest już w użyciu.

I [10/Sep/2007:14:00:53 +0200] Listening to 0:631

E [10/Sep/2007:14:00:53 +0200] Unknown Location directive # on line 816.

E [10/Sep/2007:14:00:53 +0200] Unknown Location directive # on line 831.

I [10/Sep/2007:14:00:53 +0200] Listening to 0:631

I [10/Sep/2007:14:00:53 +0200] Loaded configuration file "/etc/cups/cupsd.conf"

I [10/Sep/2007:14:00:53 +0200] Configured for up to 100 clients.

I [10/Sep/2007:14:00:53 +0200] Allowing up to 100 client connections per host.

I [10/Sep/2007:14:00:53 +0200] Full reload is required.

I [10/Sep/2007:14:00:54 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 3629 PPDs...

I [10/Sep/2007:14:00:54 +0200] LoadPPDs: No new or changed PPDs...

I [10/Sep/2007:14:00:54 +0200] Full reload complete.

E [10/Sep/2007:14:00:54 +0200] StartListening: Unable to bind socket - Adres jest już w użyciu.

I [10/Sep/2007:14:04:25 +0200] Listening to 0:631

E [10/Sep/2007:14:04:25 +0200] Unknown Location directive # on line 816.

E [10/Sep/2007:14:04:25 +0200] Unknown Location directive # on line 831.

I [10/Sep/2007:14:04:25 +0200] Listening to 0:631

I [10/Sep/2007:14:04:25 +0200] Loaded configuration file "/etc/cups/cupsd.conf"

I [10/Sep/2007:14:04:25 +0200] Configured for up to 100 clients.

I [10/Sep/2007:14:04:25 +0200] Allowing up to 100 client connections per host.

I [10/Sep/2007:14:04:25 +0200] Full reload is required.

I [10/Sep/2007:14:04:25 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 3629 PPDs...

I [10/Sep/2007:14:04:26 +0200] LoadPPDs: No new or changed PPDs...

I [10/Sep/2007:14:04:26 +0200] Full reload complete.

E [10/Sep/2007:14:04:26 +0200] StartListening: Unable to bind socket - Adres jest już w użyciu.

I [10/Sep/2007:14:05:55 +0200] Listening to 0:631

E [10/Sep/2007:14:05:55 +0200] Unknown Location directive # on line 816.

E [10/Sep/2007:14:05:55 +0200] Unknown Location directive # on line 831.

I [10/Sep/2007:14:05:55 +0200] Listening to 0:631

I [10/Sep/2007:14:05:55 +0200] Loaded configuration file "/etc/cups/cupsd.conf"

I [10/Sep/2007:14:05:55 +0200] Configured for up to 100 clients.

I [10/Sep/2007:14:05:55 +0200] Allowing up to 100 client connections per host.

I [10/Sep/2007:14:05:55 +0200] Full reload is required.

I [10/Sep/2007:14:05:56 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 3629 PPDs...

I [10/Sep/2007:14:05:56 +0200] LoadPPDs: No new or changed PPDs...

I [10/Sep/2007:14:05:56 +0200] Full reload complete.

E [10/Sep/2007:14:05:56 +0200] StartListening: Unable to bind socket - Adres jest już w użyciu.

I [10/Sep/2007:14:08:50 +0200] Listening to 0:631

E [10/Sep/2007:14:08:50 +0200] Unknown Location directive # on line 816.

E [10/Sep/2007:14:08:50 +0200] Unknown Location directive # on line 831.

I [10/Sep/2007:14:08:50 +0200] Listening to 0:631

I [10/Sep/2007:14:08:50 +0200] Loaded configuration file "/etc/cups/cupsd.conf"

I [10/Sep/2007:14:08:50 +0200] Configured for up to 100 clients.

I [10/Sep/2007:14:08:50 +0200] Allowing up to 100 client connections per host.

I [10/Sep/2007:14:08:50 +0200] Full reload is required.

I [10/Sep/2007:14:08:52 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 3629 PPDs...

I [10/Sep/2007:14:08:53 +0200] LoadPPDs: No new or changed PPDs...

I [10/Sep/2007:14:08:53 +0200] Full reload complete.

E [10/Sep/2007:14:08:53 +0200] StartListening: Unable to bind socket - Address already in use.

I [10/Sep/2007:14:12:35 +0200] Listening to 0:631

E [10/Sep/2007:14:12:35 +0200] Unknown Location directive # on line 816.

E [10/Sep/2007:14:12:35 +0200] Unknown Location directive # on line 831.

I [10/Sep/2007:14:12:35 +0200] Listening to 0:631

I [10/Sep/2007:14:12:35 +0200] Loaded configuration file "/etc/cups/cupsd.conf"

I [10/Sep/2007:14:12:35 +0200] Configured for up to 100 clients.

I [10/Sep/2007:14:12:35 +0200] Allowing up to 100 client connections per host.

I [10/Sep/2007:14:12:35 +0200] Full reload is required.

I [10/Sep/2007:14:12:35 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 3629 PPDs...

I [10/Sep/2007:14:12:35 +0200] LoadPPDs: No new or changed PPDs...

I [10/Sep/2007:14:12:35 +0200] Full reload complete.

E [10/Sep/2007:14:12:35 +0200] StartListening: Unable to bind socket - Adres jest już w użyciu.

 

Edited by Zigi

Share this post


Link to post
Share on other sites

pokaż jeszcze cupsd.conf

Nie odpisywałem wcześniej gdyż nie miałem czasu zając się sprawą ale skrobnę dla potomności.

 

Aby na kompie z domyślną instalacją demon zaczął działać poprawnie należało wywalić na piechotę z konfigu cupsa deklarację portu 631.

W swej doskonałości najprawdopodobniej yast (suse vel novel linux) dopisało deklarację raz drugi mimo, iz domyślnie ona już tam była przez co całość się wykrzaczyła.

Natomiast z kompem po re instalacji pakietów bedzie większy problem bo struktura plików nieco odbiega od tego co było przed zabiegiem i będę musiał nad tym jeszcze kilka minut spędzić.

Ale żeby ne było zbyt różowo to próba wydruku z firefoxa (1.04) kończy się źle wydrukowanym tekstem - grafika jest ok.

Wygląda to tak jakby drukował 3/4 każdego znaku i zmniejszał odstęp między tymi. Z pozostałych programów idzie ok.

 

ech nie ma to jak linux...

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...




×
×
  • Create New...