andy2 Opublikowano 5 Maja 2011 Zgłoś Opublikowano 5 Maja 2011 WItajcie Posiadam mały problemik z dźwiękiem po podkręceniu procesora | dokładny sprzęt: System operacyjny: Windows 7 Ulitmate x64 Procesor: Amd Phenom II X6 1055T 2.80 GHz Chłodzenie: Zalman CNPS10X Extreme + ZM-STG2 Płyta Główna: ASUS M4A89GTD PRO/USB3 RAM: Corsair XMS3 6GB (3x2G DDR3 PC3-12800C9 1600MHz Triple Channel (CMX6GX3M3A1600C9) (musze dokupic jedna kosc) Karta Graficzna1: EVGA GeForce GTX 470 SC+ 1280 Mb @ 625/1250/3402 (zmiana z Ati HD4890 1GB ) Karta Graficzna2:Zotac nVidia Geforce GTS 250 ECO 1GB @ 675/1620/2000 (tylko Physx) Karta Dźwiękowa1: Sound Blaster X-Fi Titanium Fatal1ty Professional Series HDD1: SAMSUNG HD502HI (S1VFJ90S236482) HDD2: SAMSUNG F4 2TB HDD3: Intel X25-M SSD 80GB (System) Zasilacz: High Power Plus 750w 80Plus Bronze Obudowa: Cooler Master HAF 922 + 2x AKASA 120mm i problem polega na tym iż po podkręceniu procesora np do 3.8ghz dźwięk zaczyna szwankować wszystko działa stabilnie jednakże nie dźwięk nie wiem co jest źle ustawione teraz ustawienia Target CPU Frequency:. 3892MHz Target DRAM Frequency: 1532MHz CPU OverClocking..........[Manual] CPU Level Up................[Auto] ---------------------------------------------------------- CPU Ratio..................................[14] AMD Turbo CORE technology............[Disabled] CPU/HT Reference Clock....................[278] PCIE Frequency............................[100] DRAM Frequency........................[1532MHz] CPU/NB Frequency.........................[2224] HT Link Speed............................[1946] GPU Booster...........................[Enabled] Enhanced iGPU SpeedStep..................[Auto] GPU Power Saving Mode................[Disabled] > DRAM Timing Configuration > DRAM Driving Configuration ************* Please key in numbers directly! ************* CPU & NB Voltage Mode...................[Manual] CPU Voltage........................1.450[1.4500] CPU/NB Voltage....................1.300 [1.3000] CPU VDDA Voltage.....................2.50 [Auto] DRAM Voltage.......................1.650[1.6500] HT Voltage..........................1.200 [Auto] NB Voltage..........................1.250 [Auto] NB 1.8V Voltage......................1.80 [Auto] SB Voltage...........................1.10 [Auto] ************************************************** ******** CPU Load-Line Calibration.................[Auto] CPU/NB Load-Line Calibration..............[Auto] PCI/PCIe CLK Status....................[Enabled] DRAM Timing Configuration DRAM CAS# Latency......................9 [9CLK] DRAM RAS# to CAS# Delay................9 [9CLK] DRAM RAS# PRE Time.....................9 [9CLK] DRAM RAS# ACT Time..................24 [24 CLK] DRAM READ to PRE Time.....................5 [5] DRAM Row Cycle Time......................33[33] DRAM WRITE Recovery Time................10 [10] DRAM RAS# to RAS# Delay...................4 [4] DRAM READ To WRITE Delay...............9 [Auto] DRAM WRITE To READ Delay(DD)..........10 [Auto] DRAM WRITE To READ Delay(SD)...........4 [Auto] DRAM WRITE To WRITE Timing..............3[Auto] DRAM READ To READ Timing...............3 [Auto] DRAM REF Cycle Time..................160 [Auto] DRAM Refresh Rate....................7.8 [Auto] DRAM Command Rate.......................1T [1T] DRAM Driving Configuration DCTO Information: CKE drive strength...................1.5X [Auto] CS/ODT drive strength................1.5X [Auto] ADDR/CMD drive strength..............1.5X [Auto] MEMCLK drive strength................1.5X [Auto] Data drive strength....................1X [Auto] DQS drive strength.....................1X [Auto] Processor ODT......................60ohms [Auto] DCTO Information: CKE drive strength.................. 1.5X [Auto] CS/ODT drive strength................1.5X [Auto] ADDR/CMD drive strength............. 1.5X [Auto] MEMCLK drive strength................1.5X [Auto] Data drive strength....................1X [Auto] DQS drive strength.....................1X [Auto] Processor ODT......................60ohms [Auto] CPU Configuration AGESA Version 3.7.0.1 ---------------------------------------------------------- AMD Phenom™ II X6 1055T Processor Revision: E0 Cache L1: 768KB Cache L2: 3072KB Cache L3: 6MB Speed : 3892MHz HT Frequency: 1400 uCode Patch Level: 0x10000BF ---------------------------------------------------------- Gart Error Reporting................[Disabled] Microcode Updation..................[Enabled] Secure Virtual Machine Mode.........[Disabled] Cool'n'Quite........................[Disabled] ACPI SRAT Table.....................[Enabled] C1E Support.........................[Disabled] ASUS Core Unlocker..................[Disabled] CPU Core Activation.................[Auto] DRAM Controller Configuration ---------------------------------------------------------- Bank Interleaving...................[Auto] Channel Interleaving................[Auto] Enable Clock to All DIMMS...........[Disabled] MemClk Tristate C3/ATLVID...........[Disabled] Memory Hole Remapping...............[Enabled] DCT Unganged Mode...................[Always] Power Down Enable...................[Disabled] Cytuj Udostępnij tę odpowiedź Odnośnik do odpowiedzi Udostępnij na innych stronach Więcej opcji udostępniania...
