and2352

Dziękuję za pomoc.

A koniec tak https://zapodaj.net/abd58f3960431.jpg.html

Początek wygląda tak https://zapodaj.net/ddaa45d7a3572.jpg.html i chyba nie wróży dobrze

Cześć.Proszę o sprawdzenie smart . https://imgur.com/a/X0kLx Dziękuję.

Witam.Prosze o sprawdzenie smart dysku.Dysk padł.Temat do zamknięcia. === START OF INFORMATION SECTION === Model Family: Toshiba 2.5" HDD MK..65GSX Device Model: TOSHIBA MK3265GSX Serial Number: 70P7C6G6T LU WWN Device Id: 5 000039 2a360a344 Firmware Version: GJ002H User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Aug 11 10:40:03 2016 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 104) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1123 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 2947 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 286 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 3978 10 Spin_Retry_Count 0x0033 158 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2929 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 42 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 76 193 Load_Cycle_Count 0x0032 095 095 000 Old_age Always - 57249 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 33 (Min/Max 9/45) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 145 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 557 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 1 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 53 222 Loaded_Hours 0x0032 093 093 000 Old_age Always - 3116 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 332 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 2672 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2672 occurred at disk power-on lifetime: 3978 hours (165 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 0a 9e 58 42 60 Error: UNC at LBA = 0x0042589e = 4348062 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 01 08 9e 58 42 40 08 00:34:23.459 READ FPDMA QUEUED 60 01 00 9f 58 42 40 08 00:34:23.459 READ FPDMA QUEUED ef 10 02 00 00 00 a0 00 00:34:23.459 SET FEATURES [Reserved for Serial ATA] 27 00 00 00 00 00 e0 00 00:34:23.459 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 00 00:34:23.458 IDENTIFY DEVICE Error 2671 occurred at disk power-on lifetime: 3978 hours (165 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 02 9d 58 42 60 Error: UNC at LBA = 0x0042589d = 4348061 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 01 10 9f 58 42 40 08 00:34:15.648 READ FPDMA QUEUED 60 01 08 9e 58 42 40 08 00:34:15.648 READ FPDMA QUEUED 60 01 00 9d 58 42 40 08 00:34:15.648 READ FPDMA QUEUED ef 10 02 00 00 00 a0 00 00:34:15.648 SET FEATURES [Reserved for Serial ATA] 27 00 00 00 00 00 e0 00 00:34:15.648 READ NATIVE MAX ADDRESS EXT Error 2670 occurred at disk power-on lifetime: 3978 hours (165 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 1a 9c 58 42 60 Error: UNC at LBA = 0x0042589c = 4348060 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 01 18 9c 58 42 40 08 00:34:07.848 READ FPDMA QUEUED 60 01 10 9d 58 42 40 08 00:34:07.848 READ FPDMA QUEUED 60 01 08 9e 58 42 40 08 00:34:07.848 READ FPDMA QUEUED 60 01 00 9f 58 42 40 08 00:34:07.848 READ FPDMA QUEUED ef 10 02 00 00 00 a0 00 00:34:07.847 SET FEATURES [Reserved for Serial ATA] Error 2669 occurred at disk power-on lifetime: 3978 hours (165 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 02 9b 58 42 60 Error: UNC at LBA = 0x0042589b = 4348059 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 01 20 9f 58 42 40 08 00:34:00.036 READ FPDMA QUEUED 60 01 18 9e 58 42 40 08 00:34:00.036 READ FPDMA QUEUED 60 01 10 9d 58 42 40 08 00:34:00.036 READ FPDMA QUEUED 60 01 08 9c 58 42 40 08 00:34:00.036 READ FPDMA QUEUED 60 01 00 9b 58 42 40 08 00:34:00.036 READ FPDMA QUEUED Error 2668 occurred at disk power-on lifetime: 3978 hours (165 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 2a 9a 58 42 60 Error: UNC at LBA = 0x0042589a = 4348058 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 01 28 9a 58 42 40 08 00:33:52.225 READ FPDMA QUEUED 60 01 20 9b 58 42 40 08 00:33:52.225 READ FPDMA QUEUED 60 01 18 9c 58 42 40 08 00:33:52.225 READ FPDMA QUEUED 60 01 10 9d 58 42 40 08 00:33:52.225 READ FPDMA QUEUED 60 01 08 9e 58 42 40 08 00:33:52.225 READ FPDMA QUEUED SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 3968 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

Witam Co powiecie o tym dysku http://zapodaj.net/83212acbb3fbd.jpg.html http://zapodaj.net/2cf4a03a8a8e7.jpg.html Dziękuję.

Dziękuję za pomoc.Pozdrawiam.

Witam.Przeskanowałem dysk mhdd.Oto wyniki: http://zapodaj.net/611841c8df3cf.jpg.html http://zapodaj.net/4a89836c74112.jpg.html Czy ten dysk jeszcze warto ratować ?