Jestem zielony w podkręcaniu :-) proszę o pomoc

[luccanus]

Jestem zupełnie zielony w sprawach podkręcania komputera :( a coraz bardziej przeszkadz mi to że mój komputerek jest strasznie wolny... Proszę o pomoc, ale lasno napisaną (co mogę zrobić żeby był szybszy)... nie weim za bardzo jakie informacje są do tego potrzebna, więc podaję bardzo obszerne z programu sisoft sandra 2003:

 

<<< System Summary >>>

-------------------------------------------------------------------------------------

 

 

 

< Processor(s) >

Model: ntel® Celeron

Speed: 766MHz

Performance Rating: PR919 (estimated)

Type: Standard

L2 On-board Cache: 28kB ECC synchronous write-back

 

< System Mainboard >

Bus(es): ISA AGP PCI USB SMBus/i2c

MP Support: No

System BIOS: Award Software International, Inc. 6.00 PG

System Mainboard: 694X-686B

System Chipset: Elitegroup Computer Sys VT82C694X Apollo Pro 133A

System Controller

Front Side Bus Speed: 1x 67MHz (67MHz data rate)

Installed Memory: 256MB SDRAM

Memory Bus Speed: 1x 67MHz (67MHz data rate)

 

< Video System >

Monitor/Panel: NEC MultiSync FE991SB

Adapter: S3 Graphics Inc. Savage4

 

 

 

 

<<< Mainboard Information >>>

-------------------------------------------------------------------------------------

 

< Computer System >

Manufacturer: VIA Technologies, Inc.

Model: VT82C694X

Unique ID: FFFFFFFF-FFFFFFFF-FFFFFFFF-FFFFFFFF

 

< System Mainboard >

MP Support: No

Model: 694X-686B

BIOS ID: 02/13/2001-694X-686B-KOB694XC-00

 

< Flash Memory Controller >

Location: Mainboard

Error Correction Capability: None

Number of Memory Slots: 4

Maximum Installable Memory: 512MB

Bank0/1 - BANK_0: DIMM 256MB

Bank2/3 - BANK_1: Empty

Bank4/5 - BANK_2: Empty

Bank6/7 - BANK_3: Empty

 

< System Chipset >

Model: Elitegroup Computer Sys VT82C694X Apollo Pro 133A

System Controller

Bus(es): ISA AGP PCI USB SMBus/i2c

Front Side Bus Speed: 1x 67MHz (67MHz data rate)

Max FSB Speed / Max Memory Speed: 1x 133MHz / 1x 133MHz

In Order Queue Depth: 4 req(s)

 

< Logical/Chipset Memory Banks >

Bank 0 Setting: 256MB SDRAM 6-1-1-1R 4-1-1-1W 2-2-2CL

Bank Interleave: 4-way

Speed: 1x 67MHz (67MHz data rate)

Multiplier: 1/1x

Power Down Mode: No

Fixed Hole Present: No

 

< Memory Module(s) >

Memory Module 1: MS3856UPS-T24A3 256MB 16x(32Mx4) SDRAM PC133U-333-542

(CL3 upto 133MHz)

 

< Environment Monitor 1 >

Model: VIA 686PM ISA

Version: 10.02

Mainboard Specific Support: Yes

 

< Temperature Sensor(s) >

Board Temperature: 23.7°C / 74.7°F

CPU Temperature: 39.5°C / 103.1°F

Power / Aux Temperature: 25.9°C / 78.6°F

 

< Voltage Sensor(s) >

CPU Core Voltage: 1.70V

+3.3V Voltage: 3.37V

+5V Voltage: 5.10V

+12V Voltage: 12.37V

 

< AGP Bus >

Version: 2.00

Speed: 68MHz

Current Data Transfer Rate: 2x 68MHz (136MHz data rate)

Max Data Transfer Rate: 4x

Side Band Enabled: No

Side Band Support: Yes

Fast-Writes Enabled: No

Aperture Size: 128MB

 

< PCI Bus(es) >

Version: 2.10

No Bridges: 1

PCI Bus 0: PCI (34MHz)

Multiplier: 1/2x

 

< LPC Hub Controller 1 >

Model: VIA Technologies Inc VT82C686/A PCI to ISA Bridge

ACPI PM Enabled: Yes

Random Number Generator Enabled: No

Multiplier: 1/4x

Speed: 9MHz

DMA Multiplier: 1/2x

DMA Speed: 5MHz

 

< USB Controller 1 >

Model: VIA Technologies Inc VT82xxxxx UHCI USB 1.1 Controller

(All VIA Chipsets)

Version: 1.10

UHCI Interface: Yes

Channels: 2

Speed: 48MHz

Legacy Emulation Enabled: No

 

< USB Controller 2 >

Model: VIA Technologies Inc VT82xxxxx UHCI USB 1.1 Controller

(All VIA Chipsets)

Version: 1.10

UHCI Interface: Yes

Channels: 2

Speed: 48MHz

Legacy Emulation Enabled: No

 

< System SMBus Controller 1 >

Model: Intel PIIX4 SMBus / compatible

Version: 4.00

Speed: 16kHz

 

< Expansion Slot(s) >

ISA: ISA 16-bit 5V FullLength

ISA: ISA 16-bit 5V FullLength

ISA: ISA 16-bit 5V FullLength

ISA: ISA 16-bit 5V FullLength

PCI (Ah): PCI 32-bit 5V FullLength InUse (C-Media Electronics

Inc CMI8738/C3DX PCI Audio Device)

PCI (Bh): PCI 32-bit 5V FullLength Available

PCI (Ch): PCI 32-bit 5V FullLength Available

PCI (Dh): PCI 32-bit 5V FullLength InUse (Analog Devices

Motorola SM56 Modem)

AGP (8h): AGP 32-bit 5V FullLength InUse (Number 9 Computer

Company SR9 8Mb SDRAM)

 

< Port Connector(s) >

PRIMARY IDE: None - ATA / None

SECONDARY IDE: None - ATA / None

FDD: 8251 FIFO Compatible - Floppy / None

COM1: Serial Port 16450 Compatible - 9 Pin Dual Inline / DB-

9 pin male

COM2: Serial Port 16450 Compatible - 9 Pin Dual Inline / DB-

9 pin male

LPT1: Parallel Port ECP/EPP - DB25 pin female / DB25 pin

female

Keyboard: Keyboard Port - None / PS/2

PS/2 Mouse - Detected: Mouse Port - PS/2 / PS/2

USB: USB - None / None

 

< Performance Tips >

Notice 224: SMBIOS/DMI information may be inaccurate.

Tip 2511: Some memory slots are free so the memory can be easily

upgraded.

Warning 2545: Large memory modules should be Registered/Buffered.

Warning 2528: System monitor device implementation is known to vary.

Tip 2525: Current AGP data rate not optimal.

 

 

 

 

 

<<< Procesor Information >>>

-------------------------------------------------------------------------------------

Model: Intel® Celeron

Co-Processor (FPU): Built-in

Speed: 769MHz

Performance Rating: PR923 (estimated)

Type: Standard

Packaging: FC-PPGA Socket370

Rated Speed/FSB: 771MHz / 1x 67MHz

Multiplier: 11.5x

Generation: 6th (6x86)

Model Information: P6C (Coppermine128) Celeron 533-1.1G 1.3-1.75V

Revision/Stepping: 8 / 6 (1)

Stepping Mask: cC0

Microcode: MU068608

Core Voltage Rating: 1.700V

 

< Processor Cache(s) >

Internal Data Cache: 16kB synchronous write-back (4-way, 32 byte line size)

Internal Instruction Cache: 16kB synchronous write-back (4-way, 32 byte line size)

L2 On-board Cache: 128kB ECC synchronous write-back (4-way, 32 byte line

size)

L2 Cache Multiplier: 1/1x (equiv. 769MHz)

 

< Host Interface(s) >

Front Side Bus Speed: 1x 67MHz (67MHz data rate)

 

< Upgradeability >

Socket/Slot: Socket 370

Upgrade Interface: Slot 1

Supported Speed(s): 769MHz (or more)

 

< Environment Monitor 1 >

Model: VIA 686PM ISA

Version: 10.02

Mainboard Specific Support: Yes

 

< Power Rating(s) >

Core Power: 20W (estimated)

Cooling System Thermal Resistance: 0.77°C/W (estimated)

 

< Sensors >

CPU Temperature: 39.5°C / 103.1°F

CPU Core Voltage: 1.70V

 

< Advanced Settings >

L2 Cacheable Range: 64GB

L2 Cache Grouping: 1 bank(s)

L2 Cache Latency: 2 clock(s)

Data Error Checking: Yes

Low Power Mode: Yes

Fast Strings: Yes

In Order Queue Depth: 8 req(s)

 

< Machine Check Architecture Settings >

No. Reporting Banks: 5 bank(s)

 

< Variable Range MTRR Settings >

MTRR 0: 00000000-0FFFFFFF (0MB-256MB) WB

MTRR 1: D0000000-D7FFFFFF (3328MB-3456MB) WC

 

 

 

 

<<< Video System Information >>>

-------------------------------------------------------------------------------------

 

<< NEC MultiSync FE991SB >>

< Monitor >

Setup Name: NEC MultiSync FE991SB

Maximum Resolution: 1792x1344

Horizontal Scan Range: 30.0-96.0kHz

Vertical Refresh Range: 50.0-160.0Hz

DPMS Energy Star Compliant: Yes

 

< PnP/DDC Monitor Data >

Manufacturer: NEC Technologies

Model ID: 61D8

Serial Number: 01010101

Manufacture Date: 2003 week 9

Display Type: RGB colour

CRT/Panel Size: 18 in

Max. Horizontal/Vertical CRT/Panel Si:370 mm / 270 mm

Input Signal Type: Analog Sync on Green 0.7/0.3V

Gamma Factor: 2.20

DPMS Modes Supported: Off Suspend Standby

EDID Version: 1.03

 

 

 

 

<< S3 Graphics Inc. Savage4 >>

< Video Adapter >

Model: S3 Graphics Inc. Savage4

Total Memory: 40MB (8MB Video) (32MB AGP)

Texture Memory: 40MB

Supports DIME Texturing: Yes

VGA Compatible: No

 

< Current Video Mode >

Video Mode: 1280x1024 16M+ TrueColour (32-bit)

Refresh Rate: 75Hz

Virtual Desktop Size: 1280x1024

 

< Video Driver >

Model ID: s3sav4m.sys

Version: 5.12.01.8012

Supported Windows Version: 5.03

Video Acceleration: Yes, All Functions

Screen Saver Active: Yes, 10 min timeout

Screen Saver Name: (None)

Low Power Saving Active: Yes, 20 min timeout

Power Off Saving Active: Yes, 20 min timeout

[SGJ]

Szukaj

 

http://forum.purepc.pl/viewtopic.php?t=50522

 

http://forum.purepc.pl/viewtopic.php?t=29395

[luccanus]

dzięki za podpowiedź, ale już wcześniej przejżałem "szukajkę" :) i przyeczytałem ten temat w faq, ale nie wyciągnęłem z tego nic co mogłoby mi pomóc... :( więc dlatego założyłem ten temat. miałem nadzieję że ktoś pokolei wytłumaczy mi co i jak mam zrobić... :(

[EZ_lo]

nie jest mozliwe to, o czym mowisz na forum, za ktorym gdzies z polowa uzytkownikow kreci kompa. wiec szukaj dalej (nawet dzial dotyczacy krecenia tu jest). i poczytaj na poczatek:

http://www.ocinside.de/

http://www.overclockers.com/

http://www.overclockercafe.com/

[luccanus]

przeglądałem już wcześniej te działy, ale nawet jeżeli znalazłem coś związanego z moimi podzespołami to i tak były to rozmowy ludzi którzy już wiedzą coś o podkręcaniu. nie znalazłem żadnego tematu ani nawet postu przeznaczonego dla kogoś tak "zielonego" jak ja :) szpreałem już też po innych stronkach i forum ale też nic nie znalazłem :( więc stworzyłem taki temat... może kiedyś ktoś też będzie miał taki problem jak ja i skorzysta z tego tematu :D

[qbass]

Powiem Ci ze twój procek "Model: ntel® Celeron" stawia cie na straconej pozycji. Juz sam w sobie to mega shit, i nie ma zachodu go podkrecac. A o grafice juz nie wspomne.